Home > Knowledge > Content
Battery tester applicable environment
Jun 12, 2017

1) temperature: 0-40 DEG C

2) use height: elevation 2Km within use

3) relative humidity: 40-80% humidity

Measuring range:

1) battery voltage measurement range: 0-lOV (BTS-2002) or 0-20V) minimum resolution l0mV

2) current measurement range: 0-12A, minimum resolution lOmA

3) internal resistance measurement range: 0-999m, minimum resolution 1m

4) identification resistor measurement range: 0.1-999.9K, minimum resolution O.1K

5) capacity measurement range: 0-10000mAH, minimum resolution 1mAH

Test speed:

1) static testing (testing all functions): 1.l-2 seconds

2) capacity test (1C current charge discharge): 3-4 hours

Measurement accuracy:

1) voltage measurement accuracy: 10V 0.5% (after calibration)

2) current measurement accuracy: 2A, 2%10A15%

3) internal resistance measurement accuracy: 150m Q 12%

4) identification resistance measurement accuracy: l, OK, S2, 1%

5) measurement accuracy of battery capacity: l0AH, 2%a

Internal CNC voltage source index:

1) output maximum voltage: lOV (BTS-2002)

2) output maximum current: 2A

3) ripple voltage: <20mV

4) load regulation rate: <10%

5) response time: 1S

Internal CNC electronic load indicator:

1) maximum voltage: 20V

2) maximum current: 2A (continuous) 10A (10 seconds)

3) maximum power: 40W (continuous) 80W (10 seconds)

Supply voltage: 220V 10% 50Hz